EDIT 2 hours after posting: it seems that others have done the same ‘investigation’. While I was typing this, several people posted the same on the CQ Contest reflector…

I have always tried to keep the ham spirit high, especially in contesting. But I know there is a lot of cheating going in. Excessive power (5kW or more?), claiming Low Power while running an amp, claiming unassisted while using packet etc. There are probably a ton more ways to cheat that I don’t even know about. That’s why contest plaques and World Records don’t mean too much to me. I’m mostly in it for the fun. Because my station / location are not positioned to win on a global scale, I admit.

But then there was this Battle of the Cheaters posting by N6TJ made on the CQ Contest reflector. I don’t really know Jim Neiger N6TJ but I respect his accomplishments in contesting and overall his postings make sense. This time, I think he’s speaking in tongues and remaining vague. In his next posting he revealed something more:

It’s amazing to me that so many are not aware that last year’s CQ WW CW SO/AB No. 1 claimed score was ultimately DQed, and with a minimal amount if interest and reading of what is available to 100% of the world to read, all could learn.

So I did some investigating. I downloaded last year’s CQ WW CW results on the CQ Mag scores and results page. The very very last line is quite interesting. I quote: Disqualified: C4M (op. RW3QC). Log results deemed incompatible with category of entry.


Then on to the logs that are made public. Here’s the C4M log claiming SOAB(A). Here’s what he claims:


That score is also on 3830 from that period only claimed as NOT assisted. What strikes me is that his 3830 posting is SOAB – NOT assisted while his submitted log claims assisted.

But look at this: the claimed scores for not-assisted SOAB-HP non-USA. Here’s the top 5 in that category:

CT3NT(CT1BOH)     6563   160   520    48 13,289,920 Madeira Team
P40W(W2GD) 6464 151 490 45 12,244,382 FRC
V47NT(N2NT) 7189 154 491 48 12,009,900 FRC
PZ5ZY(N6ZZ) 6089 150 492 43.5 11,469,330 SCCC
P40T(N6AA) 6372 143 441 46 11,041,688 SCCC

In short: the C4M 3830 Claimed score would top CT3NT with over 1 million points. It goes without saying that this will have rasied a few eyebrows resulting in very close log checking and scrutinizing his performance by the log checkers.

So what exactly did happen? Was he assisted claiming unassisted? Was it a M/S or M/2 operation submitted as SOAB? I have no clue, but I surely would like to know… And what (who?) does N6TJ mean that is is happening again this year (2007)? To be continued?

NOTE to the readers: I wonder of there ARE ANY? Make yourself known: on5zo@hotmail.com

Isn’t it great to see the SFI climb out of the bottom to 87 with A=0?    Sukkelig
Isn’t it a crying shame that this absolutely does NOT reflect on the air?    Ontblote tanden
I started the ARRL 10m contest yesterday with high expectations. But it took only 5 minutes to realize it’s not ‘here’ yet. Little signals, only noise and lots of repeats for the serial number. I tried 17m and worked the usual UA / UR and a ZL who wasn’t weak. No JA though.

Exit the shack. Enter the laptop.

Processing QSL
Finally I finished processing that huge pile of OQ5M QSL cards.
I tried my homebrew QSL Manager Processing Tool that adds the QSL_VIA field in ADIF using my DX4WIN QSL Manager database. I submitted a sample of my output format to the guys at Global QSL and got a final ‘GO’. So I ordered 1k cards which is really a bargain especially with the favourable Euro-Dollar exchange rate. No more printing labels, sticking, sorting, putting in boxes, driving to the local club to hand the outgoing batch to the club’s QSL manager. Over are the days – just some electronic processing and off we go. Yes!

I uploaded my ADIF and got a minor error. It seems that when copy-pasting a QSL manager from QRZ.COM there could be a problem with an illegal zero. If you look up 5J0A you get WØJAR. Note the slashed zero which isn’t accepted by GlobalQSL. It took me five minutes to add a function that removes this slashed zero and replaces it with a regular zero (0). Reload the ADIF et voilà: 759 QSO’s confirmed and sent via the ‘buro’. That’s a lot of labels! Or better: that WOULD have been a lot of labels.

Crunching numbers
For a while I’ve been thinking to get some statistics out of my logs since I got on HF in December 2000. That’s a lot of work in DX4WIN (I really can’t say much positive about this anymore) and you still need to calculate. So now that I’m on a programming roll, I decided to tackle that and wrote me a tool. It is still VERY MUCH under development and the current release is something like ‘minus zero point 1’. You can see what it looks like below.


This clearly shows a couple of trends:

  • I got my ticket December 2000 but didn’t make a lot of contacts.
  • End of 2001 I was OQ5ZO with a 3el yagi on 10m and terrific conditions – that was a boost!
  • During 2002 I discovered contesting.
  • During 2003 we bought the house here and needed to work in it. That resulted in a lot of commuting back and forth. And I had no antennas and no time and conditions took a plunge.
  • In 2004 I had the time but no antennas, the tower and yagi got installed the Friday before CQ WW SSB.
  • In 2005 I was OO5ZO and made the most QSO’s with this PFX in Belgium. I got a plaque from the UBA‘s president to show for it – my first plaque ever!
  • Early 2006 I bought an amp to compensate the loss of the prefix advantage. That’s not the real reason but…
  • This year (2007) was scheduled as my sabatical – no comment. There might be some kind of competition playing here.
  • As you can see, out of 77.257 contacts 77.230 are made on HF, and 65596 in CW. That’s 85% of my HF contacts in Morse Code.

I need to work on this tool to get a more usefull output but I’m glad I got the engine working. All for now, more later. 73!

Well, not quite. There have been serious stormy winds coming from the west. Last Sunday was afwul, it was a minor storm. Lucky me that came a week later or WW CW would have been wasted. The coming days aren’t looking any better. I don’t have the time to play right now (work to do, XYL’s birtday, need to catch up on QSLing etc) but I hope next week the WX will settle and finally bring us winter: cold but dry and as a cherry on top: blue skies? Then I’ll be cruising down 40m and 80m again…

In the CQ WW aftermath:

  • My 3830 Top10 days will soon be counted. Maybe, just maybe I’ll squeeze out Top10 Europe in the end? Verward
  • My mult totals have killed me, look at this 3830 score: 1000 QSO’s less, yet the same score. Ouch! I just like running and don’t have the station for REAL DX mult hunting?
  • Our RRDXA Team claimed about 20M points.  Open mond

Next weekend is the ARRL 10m contest. I don’t think I’ll be making many contacts in what will be my favourite contest in a few years. SFI sustains above 70 for a few days in a row now but we need a hundred more SFI-points to make 10m swing. Bring on the sunspots, please!

First of all: a BIG
to my XYL who supported me during this weekend by checking how the
score progressed once in a while and feeding me in a timely fashion. That and
coping with my pre-contest stress and a garden full of aluminum and copper
wires. I would never enjoy this hobby without her approval and support. But I
would never stop contesting.   Open mond


Next: station setup
(see my website).

  • N1MMLogger – accept
    no substitute!
  • A microHAM MK2R+
    driving a pair of TS-850 with band decoders and SO2R antenna
  • One kW amp for the
    running TRX and the 2nd transceiver is operated
  • An OptiBeam OB11-3
    tribander at 20m high.
  • Fritzel triband
    vertical for SO2R.
  • 40m: 2 slopers with
    simple A/B switching, one favoring
    USA and the
    other in between JA and VK facing UA.
  • 80m: inverted L vertical, with feedpoint and 2 elevated radials at 4m
  • 160m: shorty
    inverted V loaded with coils.

My target? Based on
last year: 3000 QSO and I was shooting for 3M points. A bit too optimistic since
10m was dead and 15m was poor at best. You can see the comparison with last year
in the picture below.


Glimlach  Highlights:

  • Working my friend
    K7GK on 40m long path on my sunset.
  • Working VK9AA on 4
    bands (10+15+20+40).
  • Getting called by
    numerous DX.
  • I run 160 and see
    SV9CVY on 80m. I go and work him and he asks to QSY to 160m. I tell him my QRG
    and says he’ll CQ there. I tell him I am CQing there, so in one minute I had two
    mults… SO2R pays! I was assisted this time but it pays even more when unassisted.

Bedroefd  Lowlight: ZS4TX asked to move
from 40m to 80m but his proposed QRG was occupied by two ragchewers so that
didn’t work out. Bummer!



  • The contest was
    long, I prefer 24h contests. Yet I don’t plea to reduce it or add part time
    entries. This is The Big One, no mercy on the battlefield!
  • DX propagation on
    40m LP at my sunset works but only 2 z3 worked (K7GK and WC6H). Last year I
    worked some more.
  • The rates were
    average, no real peaks like I remember from 2001 when I started contesting. I
    guess the sun needs to cooperate and support long openings to
    USA and
  • Operation was quite
    courteous. I didn’t get bothered this time.
  • Fantastic
    participation. CW dying? Yeah right!

All for now, need
to clean up the shack and the garden and catch up on postponed

73 ES

Remember my earlier post about XP acting up the week before CQ WW SSB? That one showed up again TODAY at 1200utc. Hit PANIC button! Right before CQ WW with less than 12 hours to go? This must be an anti-contest bug somewhere in XP. The message is that explorer.exe generates an error. Not Internet Exploder but the Windows (system) explorer.
System recovery didn’t help and Google showed many hits of a gazillion people being bugged by this yet no solution. A link pointed to the MS website but it was of no use. The symptoms they described were there but the causes weren’t and the solution offered didn’t help or was impossible to do.

Now what? Format C: and reinstall? With half of my antenna setup left to do this was hardly an option. One of the links pointed to Media Player so I downgraded by removing Internet Explorer 7 and Media Player 11. To no avail.
Another link told me to run "sfc /scannow" from the command prompt with the XP install CD in the CD reader. That did the trick but it took almost an hour to complete the process. Add to that the full hour lost to get to this point. I now have auto-updates disabled for the duration of the contest. I’ll look into this later on. First concern now is to survive the contest without PC problems. Fingers crossed!

Tower is up, all antennas are up, the 2el 40m sloper system shows gain and F/B and the 80m antenna was a pain to set up in the wind. Ideally this is a two man job but since I was home alone this afternoon…
I decided not to use the auto-tune solid state amp after all. Retuning / QSYing goes too slow and I don’t want to risk damaging another person’s amplifier in the heat of the battle. SWR is flat on all bands so the second rig will put out 100W and not fold back. I’ve done it like this for over a year so it’ll work out this time too.

Less than 4 hours to go. I’ll hit the couch and try to relax or even better: get some sleep.
73 / CU de Franki ON5ZO – OQ5M

In fact countdow started 364 days ago but who’s counting?

Monday 08.00AM: call utility company’s local branch. Explained my problem (ham, flickering, noise, no reception etc). Guy tells me "We’ll try to fix it ASAP". Yeah right, ASAP…
17.30: I come home, no more darkness, no more flickering. In stead a nice bright streetlight! Halleluja! Thank you Mister Utility Company!

Today I set up 50% of the station:

To do when I get home tomorow:

  • Raise tower another level.
  • Fix the 2 slopers for 40m to their anchoring point.
  • Put up 80m vertical.
  • Check everything.
  • Pray!

I also got hold of a second amp (autotune 500W) for the 2nd radio. I’m
not sure if I’ll use it – very tricky to tune and doesn’t tune my 160m
antenna at all. I need to think that over.
So that’s it for now. Next update will be on Monday. I hope I can be euphoric and happy then. My only worry is the WX. Forecast says windy but not too much so let’s hope they’re right. WX is the only show stopper here unless Murphy trikes?
73 / CU in the contest! Work me, log me, spot me – OQ5M QRZ?

This weekend I played in the LZ DX Contest. I squeezed out 947 QSO, of which about 150 with the second radio (barefoot). Technically all works fine for SO2R now. So except for Murphy, I’m ready for The Big One next weekend.

Because it was a casual effort I started on 15m one hour into the contest. One minuter later I started CQing on 20m. The 15m band was absolutely silent. I don’t mean "only few stations worked" – I mean: NOTHING there. At 1300utc! Go figure. That first hout brought me 120 QSOs. A good rate, but that was it. After that rates dropped to 80-70 – even less.
At night on 40/80m I am still bothered by that noise (see my earlier post) but I start to fear it isn’t (only) that streetlight. I slept for almost 7 hours and then started on 80m, moved up to 40m but things were quiet. 20m opened up early to UA9 and later I gor called by one LOUD JA. One worked out of 950 QSO.
I wanted to make some contacts on 15m, but things were slow. Yet I got called by a VK, a YB and 2 VU’s. I tried 10m and worked 3 stations but no other signs of life. That doesn’t look promising for next week…

The next days it’ll be counting down. Maybe prepare some stuff on Thursday and put everything up on Friday. That will take longer than anticipated, Murphy will rear his ugly head for sure! Then hopefully catch some sleep…

Bye bye till the next time!

Earlier this week I noticed a broken streetlight on a pole just across the street (less than 10m from the couch in the living room). FEAR of QRM but I didn’t dare to switch on the rig. So I filed an online alert on Tuesday, got confirmation that they took notice of the broken lamp. It isn’t broken, it’s flickering which is even worse I guess.

This afternoon I put up the SO2R high band vertical (seems to work) and the 40+80m antenna. Lamp stil broken, flashing and arcing. Bummer!
Sunset here – streetlights switch on – exit low bands. Aaarrgghh!!! With CQ WW just around the corner? I need to take affirmative action on Monday with the utility company. That or a double barrel shotgun to deal with the broken lamp?

Still I worked V8 on 40CW for an all time new one. Later (before writing this) I CQ’ed on 80m and worked 20 JA’s! Through the QRM!
I also got called by BD and DS for 2 new ones on 80m and by regular P43JB and a dozen W.
Did I mention I worked 20 JA on 80m tonight?   ;o)

More later, stay tuned but don’t tune on my frequency!

This weekend I won’t be near the shack. I’ll skip WAE RTTY. That doesn’t mean I’m not doing anything for the hobby.

For "future use" I’m making my own StackMatch. There are several homebrewed versions out there: T93M, SM0W and my friend ON4BAI all succeeded in building one. Only: mine does not work YET. It seems that I’m having problems to wind the 2:1 balun. All the mentioned versions use bare insulated wire without outer jacket, but I saw this which gave me the idea to use this "parallel wire". That makes it easier to keep the wires together and parallel. Maybe that is my problem? Back to the rawing board it is!

Yesterday I completed a software project. It’s finished and working (at least something that does!) but I need to tweak the user interface. I use DX4WIN as my general DX log and award tracking software. But I’d like to start using the Global QSL service which needs the QSL VIA info exported into ADIF. I’m still with DX4WIN V6 which doesn’t export QSL managers in the ADIF file and I ABSOLUTELY DO NOT want to buy another upgrade to migrate to V7. I’m sick of that. DX4WIN is dead – it doesn’t evolve anymore and user support is… "not so good". All upgrades I did since buying the program late 2000 have cost 25Euro but were mere bug fixes. So like hell I’m going to pay for yet another silly "upgrade". There is an alternative software suggested by the globalQSL folks but I like to use my DX4WIN QSL info in stead of adding it manually by going through the log. That’s what I want to avoid.
DX4WIN allows exporting the QSL mgr database to an ASCII file so I wrote my own ADIF parser that takes the call from the QSO and sees if there is a match in the QSL MGR file. If the DX call has a manager, my software inserts the right ADIF tag. There you go, that was a Friday well spent!

All for now, 73 / CU.

I just emptied the mailbox and found a QSL from K1QS. Walt called me in the CQ WW SSB last week and I took the time to tell him he was my very first American QSO when I got on HF late 2000. My call back then was ON4CLN. He asked me if I received a QSL, but unfortunately I have been staring at the ‘cfm=N’ field in DX4WIN for all those years.
Walt told me he’d send a QSL card and I anticipated on receiving it via the buro the coming months. But there you go: a QSL direct from K1QS, my first W station ever logged almost 7 years ago. He was my 5th overall QSO on HF. As a matter of fact it was my first excursion on the HF bands.
A lot has happened since but some QSOs you never forget. This is one of those. I needed to QRT to go to work that morning but I believe he called me for a quick one. I was glad to make the QSO – now I’m glad to mark it as confirmed. TNX OM!